Sound engineers know that the quality of speaker wires can significantly impact good sound quality and clarity.
For instance, one study found that when they were matched for power handling capacity, clarity and distortion measurements favored cables with higher-purity copper conductors over cables with lower purity copper conductors. But does this mean low-quality speaker wire cables cause sound distortion, and you should only buy expensive speaker wires?
Low-quality speaker wires can cause sound distortion. Bad speaker wires tend to have the lowest power handling capacity, poor to low clarity, causing massive sound distortion due to their lower purity copper conducting ability.
To avoid your sound speaker wire causing sound distortion, you should consider getting affordable but quality speaker wires with the highest sound clarity.
Preferably, pure copper should be used. This is because the quality of the copper has effects on sound clarity and quality via conductivity.
A study found that when they were matched for power handling capacity, clarity and distortion measurements favored cables with higher-purity copper conductors over cables with lower purity copper conductors.
Hence, it can be concluded that low-quality speaker wires tend to create massive sound distortion due to their poor conducting ability, causing unclear terrible sounding audio frequencies.
Which also causes deafening loud sounds and even ear-bleeding at high decibels.
Moreover, badly designed sound connections like daisy-chaining HDMI cables and switches or manufactured speakers could also cause distorted sounds due to poorly built components or incorrectly installed parts such as the speaker wire.
A poorly designed or manufactured speaker can cause sound distortion through their badly installed components such as the speaker wire.
No wonder that it is vital to pay attention to any changes in your audio device’s performance with different wires. For instance, if you find that when you use a high-quality cable, there is an improvement in sound clarity and quality, but you don’t hear much of a difference when using cheap wires, then it could be that your current cheap speaker wire may be causing the problem due to its poor conductivity properties which might interfere with some electrical signal within your speakers.
While most experts agree on this point, many disagree about how significant the effect of wiring really is on overall sound quality. Most sound engineering novices’ question is: Are premium speaker wires better than cheap and affordable speaker wires?
Not necessarily! Your needs and budget will ultimately decide how good you want your speaker wire to be. The market is filled with a wide variety of speaker wires which suit different budgets and suit different needs.
For instance, the quality of the sound produced by cheap speakers tends to get distorted when they are connected to an amplifier via low-quality wires. Hence, you need to consider your personal needs before considering purchasing affordable but quality speaker wires.
And you will possibly meet some sound experts who tend to believe that there is no significant effect on overall sound quality due to the speaker wire’s conductivity properties since it can be easily overcome by changing other aspects in an audio device. such devices are the amplifier or the cabling used within your speakers themselves.
Lastly, remember that other factors can cause sound distortion, such as the type of components used in your audio device.
It would be best to consider different aspects such as the variety of speaker wires available and their uses and these factors before making a purchase decision.
For instance, your speakers may require bi-wire connections; hence it is vital to check if your speakers allow for this and then choose a wire that is suitable for two-way connection applications. Thus:
Are premium speaker wires better than cheap and affordable speaker wires?
Premium speaker wires are no better than cheap or affordable speaker cables! It all depends on your personal needs and budget!
Moreover, Suppose you are looking for high-performance speaker wires for heavy-duty applications or to connect equipment in different rooms. In that case, it is worth investing in a better speaker cable brand with better conductivity properties.
In conclusion, the way your audio device is being used and your budget will ultimately determine how good you want your speaker wire to be. Remember that other factors can cause sound distortion, such as the type of components used in your audio device.
For instance, a poorly designed or manufactured speaker can cause sound distortion through their badly installed components such as the speaker wire.
However, if you need less robust wires to link say an amplifier and a set of speakers in the same room then there are cheaper options available that will not significantly affect audio quality.
So before making any decisions about what type of speaker wire to buy, it is important for you to consider your needs and budget.
How do you know if your speaker wires are bad?
Spotting the difference between the good and the bad speakers wires can be difficult, especially when you are just getting started with your home theater system.
The truth is that some people simply go for the cheap wires, while others go for the most expensive ones without actually checking if they are fine or not. But how will you know if they are okay?
One thing you have to check is whether there are any cuts on the wire. If you notice cuts on your speaker wires, then it might affect your sound quality. You also want to check whether or not there are any loose connections.
By checking these two things alone, you can already tell whether or not your speaker cable is bad. It is essential to keep in mind that this problem usually arises once in a while wires get damaged by time, and it’s always a good idea to have a spare in case the problem persists or gets worse.
