How do I change the keyboard light on my Acer Nitro 5?

You are here:
Estimated reading time: 5 min

Changing the keyboard light on the Acer Nitro 5 is a simple task that can be done in less than five minutes.

In general, you can change the keyboard light on Acer Nitro 5 using a nitro sense button on your computer keyboard. By pressing a keyboard shortcut FN+F9, you can either turn the keyboard backlight on and off.

How To Change The Keyboard Light

To change the color of the computer keyboard, you need to go into the “Control Panel” and access the “Settings”.

After accessing settings by entering it through your Start menu, you will want to click on the “Devices” tab. The devices tab contains all of your hardware’s information. You are looking for one called ” All-in-One Media Keyboard “.

Within this device category, you are looking for one called an ” LED Key “. After clicking on it, there should be a section called “LED Brightness & Color” which includes four options: off , low , medium or high . Selecting any of these will change your keyboard light to that setting.

Following this, you can experiment with each level and choose which one is the most comfortable for you when typing in low or no light. You may also want to add a custom color by clicking on “Custom” under LED Brightness & Color and using the RGB scale below it.

Changing your keyboard backlight is so easy! Why not give it a try? If you do not find these settings within your Control Panel, please refer to your user manual or contact Acer’s customer service department.

Related Questions:

Changing the backlight of an all in one media keyboard

If you want to change the backlight of an all in one media keyboard, we recommend following these steps:

• Ensure that all media programs are closed and no other applications will interrupt the process.

• Calculate how long you want to keep your keyboard light on for, and set a starting time and an ending time (e.g 5 minutes from now and 10 minutes from now).

• Open the Start Menu and click the Program folder. Then open up Acer Care Center and go to Power Management > Change Precision Backlight

• Press Ctrl+PgUp to slowly make the backlight brighter, and Ctrl+PgDn to make it dimmer (press as many times as you would like); then press Enter to confirm each brightness setting

• When your first time begins (e.g 5 minutes from now), Gradually increase your keyboard’s brightness until you reach its maximum setting; then press Enter to save your new settings.

• During this process, adjust the level of brightness if needed by pressing Ctrl+PgUp or PgDn.

• The second time will be when your ending time is due – gradually decrease your keyboard’s brightness until it is at its lowest setting, then press Enter to save your new settings.

• Ensure that all media programs are closed and no other applications will interrupt the process.

• Calculate how long you want to keep your keyboard light on for, and set a starting time and an ending time (e.g 5 minutes from now and 10 minutes from now).

• Open the Start Menu and click the Program folder. Then open up Acer Care Center and go to Power Management > Change Precision Backlight

• Press Ctrl+PgUp to slowly make the backlight brighter, and Ctrl+PgDn to make it dimmer (press as many times as you would like); then press Enter to confirm each brightness setting

• When your first time begins (e.g 5 minutes from now), Gradually increase your keyboard’s brightness until you reach its maximum setting; then press Enter to save your new settings.

• During this process, adjust the level of brightness if needed by pressing Ctrl+PgUp or PgDn.

• The second time will be when your ending time is due – gradually decrease your keyboard’s brightness until it is at its lowest setting, then press Enter to save your new settings.

         Changing backlight on Acer Predator Helios 300 laptop

If you want to change the backlight of an Acer Predator Helios 300 laptop, we recommend following these steps:

• Ensure that all media programs are closed and no other applications will interrupt the process.

• Calculate how long you want to keep your keyboard light on for, and set a starting time and an ending time (e.g 5 minutes from now and 10 minutes from now).

• Open the Start Menu and click the Program folder. Then open up Acer Care Center and go to Power Management > Change Precision Backlight

• Press Ctrl+PgUp to slowly make the backlight brighter, and Ctrl+PgDn to make it dimmer (press as many times as you would like); then press Enter to confirm each brightness setting

• When your first time begins (e.g 5 minutes from now), Gradually increase your keyboard’s brightness until you reach its maximum setting; then press Enter to save your new settings.

• During this process, adjust the level of brightness if needed by pressing Ctrl+PgUp or PgDn.

• The second time will be when your ending time is due – gradually decrease your keyboard’s brightness until it is at its lowest setting, then press Enter to save your new settings.

How do you change the backlight on a wireless keyboard?

Changing the backlight on a wireless keyboard doesn’t require any specific steps.

On your wireless keyboard, press the function key+ Alt button to turn the keyboard backlight on. One ALT button click toggles the light on, the second click turns the brightness and the third click of FN+ ALT key turns the keyboard backlight off.

To change the backlight on the wireless keyboard, press the function key down (FN+CTRL button for color changes continue to click and you will see different color options come up.

Changing The Backlight On Wireless Keyboard Via Computer Utility Settings.

Open up the Start Menu and go to Programs then Acer Care Center. Once there, open Power Management > Change Precision Backlight by pressing Ctrl+PgUp to make the backlight brighter or Ctrl+PgDn to make it dimmer (just hold down either of these keys until you get to the brightness you prefer).

Press Enter on your keyboard when you are done setting your preferred brightness level. You can hold either of these two keys down while also moving your mouse cursor in order to adjust how fast the light changes.

To save your preferred settings, press Enter again followed by clicking Save at the bottom right corner of this window. Changing the backlight on a wireless keyboard doesn’t require any specific steps. Open up the Start Menu and go to Programs then Acer Care Center.

Once there, open Power Management > Change Precision Backlight by pressing Ctrl+PgUp to make the backlight brighter or Ctrl+PgDn to make it dimmer (just hold down either of these keys until you get to the brightness you prefer).

Press Enter on your keyboard when you are done setting your preferred brightness level. You can hold either of these two keys down while also moving your mouse cursor in order to adjust how fast the light changes. To save your preferred settings, press Enter again followed by clicking Save at the bottom right corner of this window.

How do I turn off my laptop’s keyboard backlight?

To turn off your laptops keyboard backlight, press Fn + Esc. Pressing either of these keys will immediately turn off the keyboard backlight.

Press both keys again to turn the keyboard backlight back on. Changing The Backlight On Wireless Keyboard Via Computer Utility Settings.

Open up the Start Menu and go to Programs then Acer Care Center. Once there, open Power Management > Change Precision Backlight by pressing Ctrl+PgUp to make the backlight brighter or Ctrl+PgDn to make it dimmer (just hold down either of these keys until you get to the brightness you prefer).

Press Enter on your keyboard when you are done setting your preferred brightness level. You can hold either of these two keys down while also moving your mouse cursor in order to adjust how fast the light changes. To save your preferred settings, press Enter again followed by clicking Save at the bottom right corner of the window.

How do I change my Acer laptop’s backlight? Changing The Backlight On Wireless Keyboard Via Computer Utility Settings.

Open up the Start Menu and go to Programs then Acer Care Center. Once there, open Power Management > Change Precision Backlight by pressing Ctrl+PgUp to make the backlight brighter or Ctrl+PgDn to make it dimmer (just hold down either of the computer keyboard keys until you get to the brightness you prefer).

Conclusion:

Changing the keyboard light on the Acer Nitro 5 is a simple task that can be done in less than five minutes. Changing your keyboard backlight can be done by changing your keyboard light settings and choosing a color with the options of off, low, medium or high.

Changing your backlight on your laptop does not cost a dime but it helps you work more comfortably in low lighting conditions. Changing the brightness and colors of a computer keyboard can help you work more comfortably in a variety of lighting conditions.

Was this article helpful?
Dislike 3
Views: 9492