Glass-top stoves are popular because of their smooth surfaces, which give your kitchen a new, clean, and contemporary appearance.
When not in use, they may be used as additional counter space, and maintenance is a breeze because they do not have grates compared to gas or electric stoves. But sometimes, this can easily get damaged and may need to be replaced. So, how much does it cost to replace it?
The Average Cost of Repairing a Stovetop or Cooktop is between $50-$200. According to HomeAdvisor, the typical cost of an oven range repair will cost a household anywhere between $50 and $200.
The overall cost of wiring and installing a conventional electric cooktop is approximately $550, whereas the cost of installing a gas cooktop varies from $650 to $1,000, based on the pre-existing gas line.
Whereas the glass-topped stove is intended to resist damage from kitchenware, the cooktop may still be scratched progressive wear and tear from the cooktop’s heat or broken by mistake.
In certain cases, this deterioration necessitates the replacement of the glass top. Disconnect the stove from the wall to get access to the electric stovetop power cable and disconnect it. Raise the glass stove top’s front edge.
What is a Glass Stove Top, and How Much Does it Cost To Replace One?
A stovetop is a smooth, flat surface that is used for cooking, and it is equipped with burners that make boiling, frying, and even simmering more convenient and efficient. It is also known as a countertop stove or a stovetop.
A new gas stovetop that needs electrical changes costs between $500 and $1,000 on average, with the majority of households spending $650 to install a new stovetop that needs electrical adjustments.
Although costs vary considerably, they may be as little as $375 for a simple electric stovetop installed and as much as $3,000 for a high-end induction stovetop placed in a kitchen island, depending on the model.
Types of Glass Stove Tops and Their Costs
Electric Smoothtop
Electric radiant smooth top stove tops are more common than induction, owing to their lower cost. Each model in our rankings has at least one high-output burner. The majority feature expandable twin or triple elements that allow you to swap between a big, high-power element and a tiny, low-power element inside.
Cost:$800 to $1000
Induction Cooktop
Electric induction cooktops utilize magnetic coils embedded under the ceramic glass surface to rapidly produce heat sent directly to the pan, allowing for accurate simmering and temperature control while cooking.
Cost $1000 to $1500
Gas Cooktop
We understand if you want to cook with gas. Having a flame makes it simpler to evaluate the heat, have a feel for it, and rapidly go from one high setting to another low one.
The response time is exceptional, particularly in comparison to a smooth top. It takes virtually no time at all for the pot and the food within it to notice when you go from high to medium heat on a gas stove.
Cost: $700 to $3000
The Impact of Replacing a Broken Glass Stove Top vs. Installing an Inexpensive Drop-In Cooktop
A cracked or broken glass cooktop may shatter, making it potentially dangerous electrical equipment. It is recommended that you replace the glass cooktop for your safety.
To replace the glass cooktops, you must first unplug the stove and afterward unscrew the bolts that hold the cooktop to the base of the stove.
After that, remove the cooktop from the oven and set it aside. Replace the old one with the replacement one you have. Follow the instructions in the manufacturer’s handbook when replacing the old one.
Drop-in ranges differ a lot from the slide-in models as well as freestanding ranges. These seem like slide-in ranges. However, they’re mounted on a bottom cabinet or shelf and don’t touch the floor.
Furthermore, these ranges are typically hardwired into a junction box behind the range, not into an outlet. Due to their restricted availability, we will not suggest building a new kitchen to suit a drop-in range right now.
A cooktop above a wall oven may take up as much space while appearing and feeling built-in if you want a luxury option. Essentially, we don’t suggest replacing a drop-in range with another one right currently.
The Complete Guide to Replacing Glass Stove Tops
Why should you replace your glass stovetop?
Cooktops made of glass are not indestructible. In the event that your stove is struck by a large object and the glass breaks, or if a crack forms over time, or if the enamel on the top is severely damaged, you have a remedy at your disposal. Contrary to popular belief, replacing the glass cooktop on your glass-top stove is simpler than it seems.
Light scratches may be rubbed off without causing damage to the cooktop or creating a fire danger. With the proper solutions and a little elbow grease, stains may be removed, even if they are as nasty as caked-on spaghetti remains that have been burnt.
A glass top should only be changed if it is chipped, cracked, or otherwise damaged. In these instances, the cooktop of the stove is effectively useless until it is replaced.
With several models, changing the glass on the stovetop often entails replacing the whole cooktop system. Typically, this renders a stove almost unusable. Fortunately, the majority of GE machines do not fall into that group. In comparison to their competitors, this is a very simple repair.
What to Consider When Shopping for Replacement Glass Stove Tops
Size
Because the majority of cooktops are 30 or 36 inches broad, we evaluate models in these dimensions. However, cooktops varying in size from 21 to 48 inches are available.
Most have 5 or 6 burners, but this does not imply you can use them all simultaneously. The majority of 30-inch cooktops have 4 or 5 burners, whereas the majority of 36-inch cooktops have five or six burners.
Fuel
Both electric and gas cooktops are capable of providing acceptable performance. However, you might find it simpler to gauge heat by the look of the gas flame, and when you move the knob from moderate to high on a gas type, the pot, as well as the food within it, will feel that shift in temperature almost instantly when you do so.
Electrical components heat more quickly and hold a lower temperature more effectively than gas burners. However, since burners respond slowly, pots and pans react more slowly to temperature fluctuations.
How to Get Your Home Ready For The New Glass Cooktop
In most cases, replacing the glass top of a General Electric stove may be accomplished with reasonable ease. The burners are placed under the glass top, which is made of a single solid piece of glass.
The stove’s electricity should be disconnected either by disconnecting it from the wall or by turning off the circuit breaker that powers it.
Open the oven door and look inside for the two bolts that keep the glass cooktop in place. Remove the two bolts and replace them with new ones.
It is possible to find them beneath the front lip of the stove. Remove the screws from the bottom of the cabinet.
Raise the glass top and use a wooden rod or metal pole to hold it in place. You will be able to operate securely within the stove as a result of this.
Remove the burners that are connected to the bottom of the glass top by unscrewing the screws. The age of your stove will determine the method to be followed. Check for a bracket that connects each burner to the stove and holds it in place.
Alternatively, the burners may be mounted on a flat bracing. Remove the screws that keep the burners in position and drop them onto to the stove cabinet to complete the installation.
Remove the brace as well as lower the glass top until you can remove the tabs at the rear of the cooktop and take them out of the stove slots, then replace the brace and lower the glass top. Remove the glass top from the table and place it face down on your workspace.
When installing a new glass top, be sure you use the brackets that came with it.
Place the new glass top on top of the stove and tighten the screws. Then, using your fingers, slide it beneath the control panel at a 45-degree angle.
Attach the burners to the bottom of the glass top and hold them in place using the brackets that come with the stove.
Lower the glass and tighten this with the two screws that were previously removed from the frame.
Close the oven door, turn on the power, and check to see whether everything is working properly.
Conclusion
Stovetops enhance a kitchen’s flexibility and functionality. Often placed independently of the oven, a stand-alone stovetop may be put on kitchen islands, peninsulas, and other places to enhance the functionality of the space.
Cooktops are available in a variety of designs and kinds to suit their intended purpose. Generally, the cost of replacing a stovetop is between $500 and $1,000, but it may go up to $3,000 for more complex problems.