What Size Smurf Tube for HDMI?

You are here:
Estimated reading time: 3 min

Nowadays. The majority of users connect their gadgets via HDMI cords. To future-proof a house, smurf tubes are often used. Smurf tubes are significant because they allow you to be more flexible in terms of repairing and removing cables that are no longer in use without having to demolish your property. What size smurf tube should you use for HDMI cables?

As a general guide, 3/4 inch smurf tubes are the best choice for HDMI cables. Because your choice of smurf tube sizes used as conduits largely depends on what HDMI brand cable and what cable portend they have, just choosing your smurf tube rudimentary will not help.

Typically, Smurf tubes provide flexible tubing and are widely used for future-proofing HDMI cables as well as other low-voltage connections, according to the manufacturer. Furthermore, they protect current wires as well as other things.


The kind of the size of smurf tube you choose for an HDMI cable will depend on the size of the HDMI cable. To determine the kind of smurf tubing that you will use, you will measure the width of the connector.

For example, if you use a regular HDMI cable that is 3/4 inch in diameter, the smurf tube you obtain should be around 1 inch in diameter. However, it is usually a good idea to select a size that is at least two times larger than the one you are currently wearing just to be on the safe side.

If you want to run several HDMI cables, you should consider purchasing a smurf tube that is much larger than the total widths of all the HDMI cables combined.

If you want to run numerous HDMI cables, you will need tubing that is larger than the sum of the diameters of the HDMI cables you will be using.

Why use smurf tubes


Smurf tubes are often available in a variety of sizes, including 1/2″, 3/4,” 1,” and 2,” but you may also purchase them in larger quantities. It is lighter, hand flexible, non-conductive, moisture, fire, as well as corrosion-resistant, and it is also non-reactive to light.


If you are routing smurf tubes in your drywall, they can be routed to the furthest outlet from your distribution hub. For example, a smurf tube can be routed from the basement to your bedroom to your living and back down to the basement. 


How can I get HDMI wires to pass through smurf tubes without damaging them?

When it comes to pushing an HDMI cable through the smurf tubing, the operation is not a very simple one, particularly when it comes to pulling exceptionally lengthy lengths of HDMI cable.


Except if you are tugging through a completely smooth as well as short conduit, you will almost certainly encounter friction and resistance as the wire becomes tangled, rendering the whole procedure more difficult to complete.


There are, however, a few strategies and equipment that may assist you in effectively pulling HDMI wires and connections through smurf tubes, including the following:

Fisherman’s tape is the most popular tool used among electricians for dragging cables into conduits, but it is also the most expensive.


It is possible to purchase fish tape in a range of lengths, including up to 100 feet. As a result, be certain that you purchase the correct size.

Pulling the wire through the tube with a pull-string that has been taped to it is possibly the most straightforward method.


Tug the HDMI cable using a lengthy, strong pull thread of any sort then attach it to the wall. To ensure that the ridge is completely covered, the connection should be placed at least two inches above the string.


This will assist in reducing the amount of pressure applied to the connection when tugging and therefore will help in preventing the HDMI cable from becoming trapped. Place the thread in the center of the smurf tube then draw it as straight while you’re still holding the thread in position.



Smurf tubings are exceptionally simple to use when it comes to HDMI cables. Furthermore, they are highly affordable. The size of a smurf tube that you choose for your HDMI cables will depend on the size of HDMI cables that you have, the HDMI connector’s width helps in determining the size of the connector used.

Keep in mind to avoid making abrupt bends so that the HDMI wires may be easily pulled out and retrieved. If you have to include any, make it a good o


Was this article helpful?
Dislike 0
Views: 503