Airpods are simple to use and seamlessly link with devices. However, you may notice that your AirPods aren’t able to connect with your equipment. This leads us to the question, “Why won’t my AirPods connect?” There is no need to be concerned; as I will show you how to fix the problem so you can get back to listening to your favorite music or podcast.
In general, if the iOS isn’t updated, Bluetooth discovery mode isn’t enabled on the respective device, or the device’s firmware has recently undergone a driver update that is glitching out, Airpods won’t connect.
Typically, many things can cause your AirPods to lose their connection, including being out of range, having low power, having an issue with Bluetooth on your device, having outdated software, or even having your AirPods connected to another device by accident.
Many times, an issue with your device or Bluetooth can cause a lack of connectivity If the issue is software-based, updating the iOS may resolve the issue. Make sure to update both the iOS and the device’s respective firmware to resolve connectivity issues.
If your AirPods are connected to another device, try disconnecting them. Sometimes, when your earbuds are connected to another device, there can be a lag that interrupts your ability to connect with other devices. Disconnecting your AirPods will reset them before attempting to connect again.
Overall, Airpods are simple to use and will almost always connect seamlessly to any device. However, it’s not unusual to have connectivity issues where you discover that your AirPods are unable to connect to your devices at all.
What does this have to do with “Why won’t my AirPods connect”? If your AirPods won’t connect, don’t worry; we’ve got you covered with step-by-step instructions on how to fix the problem and get your music playing again.
How to Fix the Airpods Won’t Connect Issue
To resolve the failed connections issue that you are experiencing on your device, there are a few things that you may do to help. Using the solutions provided below, you will be able to resolve the issue with your AirPods.
Restart the Device
This is the most fundamental solution that you may attempt initially. By pushing and holding the power button for a few seconds, you may restart your smartphone. After that, drag the slide to shut off your iPhone and then switch it back on after 30 seconds.
Activate Bluetooth
In your settings application, you can turn on Bluetooth on your device as well as turn it off again if you are facing problems. This can also be done through the control center.
Turning off Bluetooth is simple; just touch on Bluetooth and then press on it again after a few seconds to switch it back on.
Make Sure Your AirPods Are in Good Working Order
If you encounter the AirPods will not connect issue for an extended period, a hardware fault may exist. If you bought your AirPods from a retailer, you have 30 days to return them to that retailer. Outside of the return window, you may get the AirPods repaired using Apple’s online support.
Allow the Devices to Be Within Range
The AirPods communicate with other Apple devices over Bluetooth, and the connection is only effective when the devices are all within a set range of one another.
Therefore, you will have to make sure that all your devices are in the same range. To see if you are in the same range as your AirPods, go to the control center on your device and click on the audio output button, then check if you can see your AirPods listed. If the AirPods are not listed, it means they are not within range.
Ensure That Your Airpods Are Connected To the Correct Device.
It is important to double-check that your AirPods are connected to the correct device, since they are intended to connect to almost any device associated with your Apple ID like your iPad, Mac, and so on.
On your other devices, you can access the audio interface by navigating to the control center to check if your AirPods are connected to the devices.
iOS Should Be Updated To the Most Recent Version
Software updates are not only there for adding new features; they’re also for fixing problems and improving the performance of current ones. Being on the most recent version assures that you’re receiving the most up-to-date features and functionality that Apple has to offer. To ensure that you are using the most recent version.
iPods Should Be Charged Before Use
Check to ensure that your AirPods have enough battery life to function properly. Check the battery’s charge status of your Airpods.
If your AirPods are fully charged but your iPhone is still not detecting them, it is possible that your AirPods are not paired to your device and therefore, you need to pair them again.
Conclusion
As seen in this post, most of the reasons why your Airpods won’t work are not very big, and you will not require the assistance of a professional or a technician to resolve them.
A single touch on your device may make all the difference; as long as you have an idea of what is causing them not to work. If any issue is recurring or cannot be resolved by following these basic procedures, you should consult with a technician in your area.
